FLUX Air Operated Diaphragm and Magnetically Coupled Centrifugal Pumps
Recommended for transferring low to high viscosity products, even with solids in suspension, as well as abrasive, high flammability or aerated liquids.
Features and benefits:
self-priming
safe dry-running
max. size of solids: 1/8″
Connections: Suction/discharge side BSP 3/8″ female Air inlet/outlet BSP 1/8″ female
The pump is available in:
Pump housing: PP, PTFE
Diaphragm: EPDM, FKM, NBR, PTFE
Temperature range:
Pump housing: PP: up to max. 140 °F PTFE: up to max. 212 °F
Diaphragms, balls and seals: EPDM: up to max. 176 °F FKM: up to max. 194 °F NBR: up to max. 194 °F PTFE: up to max. 212 °F
Type RFML 10 – ATEX100:
explosion-proof to Directive 94/9/EC-ATEX100, PTB-Registration No. 04 ATEX D102-1
Pump housing: PP conductive, PTFE conductive
Diaphragm: EPDM, FKM, NBR, PTFE
Features and benefits:
self-priming
safe dry-running
max. size of solids: 5/32″
Connections: Suction/discharge side BSP 1/2″ female Air inlet/outlet BSP 1/4″ female
The pump is available in:
Pump housing: PP, PTFE
Diaphragm: EPDM, FKM, NBR, PTFE
Temperature range:
Pump housing: PP: up to max. 140 °F PTFE: up to max. 212 °F
Diaphragms, balls and seals: EPDM: up to max. 176 °F FKM: up to max. 194 °F NBR: up to max. 194 °F PTFE: up to max. 212 °F
Type RFML 15 – ATEX100:
explosion-proof to Directive 94/9/EC-ATEX100, PTB-Registration No. 04 ATEX D102-1
Pump housing: PP conductive, PTFE conductive
Diaphragm: EPDM, FKM, NBR, PTFE
Features and benefits:
self-priming
safe dry-running
max. size of solids: 1/4″
Connections: Suction/discharge side BSP 1″ female
Air inlet/outlet G 1/4″ female
The pump is available in:
Pump housing: PP, PTFE
Diaphragm: EPDM, FKM, NBR, PTFE
Temperature range:
Pump housing: PP: up to max. 140 °F PTFE: up to max. 212 °F
Diaphragms, balls and seals: EPDM: up to max. 176 °F FKM: up to max. 194 °F NBR: up to max. 194 °F PTFE: up to max. 212 °F
Type RFML 25 – ATEX100:
explosion-proof to Directive 94/9/EC-ATEX100, PTB-Registration No. 04 ATEX D102-1
Pump housing: PP conductive, PTFE conductive
Diaphragm: EPDM, FKM, NBR, PTFE
Features and benefits:
self-priming
safe dry-running
max. size of solids: 5/16″
Connections: Suction/discharge side BSP 1 1/2″ female
Air inlet/outlet G 1/2″ female
The pump is available in:
Pump housing: PP
Diaphragm: EPDM, FKM, NBR, PTFE
Temperature range:
Pump housing: PP: up to max. 140 °F
Diaphragms, balls and seals: EPDM: up to max. 176 °F FKM: up to max. 194 °F NBR: up to max. 194 °F PTFE: up to max. 212 °F
RM magnetically coupled centrifugal pumps without shaft seal, made of PP, PVDF, PPS (Ryton®) or stainless steel. Magnetically coupled centrifugal pumps are mainly used for industrial applications.
RM
Magnetically coupled centrifugal pumps
RM-CooL
magnetically coupled centrifugal mini-pump Mainly used as cooling circuit pump in electronic equipment like computers, laser systems etc.
RM-TS
Absolutely safe to run dry RM-TS, the first magnetically coupled centrifugal pump without any sleeve bearing that is absolutely safe to run dry.
By admin| 2017-04-05T13:56:30-04:00 February 26th, 2012|Uncategorized|Comments Off on FLUX Air Operated Diaphragm and Magnetically Coupled Centrifugal Pumps
Recommended for transferring low to high viscosity products, even with solids in suspension, as well as abrasive, high flammability or aerated liquids. 
RM magnetically coupled centrifugal pumps without shaft seal, made of PP, PVDF, PPS (Ryton®) or stainless steel. Magnetically coupled centrifugal pumps are mainly used for industrial applications.
